SA-902 Thermoplastic Road Markings Paint Solid Acrylic Resin Good Adhesion And Flexibility

Road marking paint resin SA-902

thermoplastic road markings paint resin, preformed thermoplastic or polymer tapes can be used for lane lines, crosswalks, or markings such as turn-lane arrows.

Acrylic resin Property:

Appearance White powder

Solid Content(％) 100

Softening Point(℃) 120

Acid Value(mgKOH/g) 22

Tg(℃) 40

Viscosiy(mpa.s) 250-450(37.5%in Toluene)

Solubility:

Soluble:Ester,Ketone and Aromatics.

Insoluble:200# Gasoline and Alcohol.

Character:

1. Good adhesion and flexibility
2. Good dispersivity and leveling
3. Good chemical,water and alcohol resistance
4. Good compatibility with Chlorinated rubber or High Chlorinated Polyethylene

Application:

1. Road Marking Paint
2. Exterior Coating
3. Industrial Coating

Package:

25Kg/bag

Storage:

Store in its original packing at the place where is dry and installed with ventilation eduipment

The road marking paint acrylic resin has the following features:

1. It contains a single component, cures at ambient temperature, never needs heating (hot melt road marking paint needs heating), and is a novelty road marking paint. It has good adhesion to road, and good anti -slip property because of anti-slip agent in it, and therefore ensures travel safety. It dries at ambient temperature, and has good adhesion, anti-corrosivity, waterproof, anti-wear, good hardness, elasticity, and excellent physical properties.

1. Mix the road marking paint very well before use. Dilute it till the required viscosity. Mix well if deposit or agglomeration occurs in the product before construction. Avoid its contact with other thinner. Spray or brush it.

1. The road marking paint shall be protected from rain, direct sunlight and collision during transport. It should be stored at a cool and well-ventilated place against sunlight, without ignition source and far from heat. The construction site shall be ventilated. The painters shall wear personal protective equipment. Prohibit smoking at the construction site.

1. Road surface preparation: Oil, dirt, dust and water is removed from the road surface to be painted. The surface must be kept clean, and dry. Grease, dirt and impurity are removed from the road surface. The roads shall be dry and free from dust. Painting shall be stopped on a rain or snowy day. Prohibit painting on wet or icy road. For the roads with stringent requirement, paint the primer in advance. The road marking paint has the shelf life of 24 months. If it is necessary to paint the primer, both the primer and top coating shall be painted in order to avoid dust on the primer film of the road.

Established in 2010, Xiamen WangQin Chemical Technology is a professional corporation specializing in researching, developing manufacturer for different resin products. With a staff of 50 people, WangQin has been equipped with advanced manufacturing facilities and a full range of product testing equipment to assure and maintain ISO9001 of Quality Management System. With more than 10 years’ development, WangQin has become a leading supplier in resin industry for both domestic and overseas market.

With annual production for both water-borne and oil resin total up to 20,000 tons, WangQin has been able to offer both general resin products and also customer – tailored coating products for different market application. So far, the application has covered to almost all industry sectors and domestic sectors.

As a privately-owned company, WangQin adheres to the following core value to make sure the company goes into the right path as planned.

• Personal and Professional working relationships
• Complete trust and respect for each person on our team
• Innovation and Quality is our business

By referring the above guideline, WangQin also has a specific focus to following communist party’s headline, targeted at “ The Belt & Road “ ( B&R) for long term development.

WangQin will continuously commit to the Research and Development of Industrial Resins in our engineering and Manufacturing. We will be making every necessary effort to offer environment friendly and customer oriented products to the high quality expectations of our present and future clients.