High Precision CHM-T560P4 5500cph SMT Production Line For Assembly

High Precision CHM-T560P4 5500cph SMT Production Line For Assembly

About Us

Hunan Charmhigh Electromechanical Equipment Co., Ltd is the well-known manufacturer of high-end
SMT equipment in China.
The company is located in the Changsha High-tech Development Zone,
covering a total area of 3600 square meters.
As a professional modern science and technology enterprise capable of both R&D,
production and marketing, Charmhigh has been leading the way in SMT technology
for more than ten years.
Different series of multi-head full-automatic SMT machines have been developed and
manufactured by Charmhigh to meet various practical production needs.
In accordance with the business philosophy of "Customer First, Innovation Paramount",
Charmhigh has won the hearts of thousands of customers all over the world.

This type of production line is suitable for medium enterprise's daily manufacture requirements, such as small batch production for electronic products and all different kinds of SMD.

CHM-T560P4Specifications
Dimensions	1180mm(L)×870mm(W)×640mm(H)
Weight	140kg
Power Supply	AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 400W
Air Supply	0.5MPa ~0.7MPa
Vacuum Generation	Built-in vacuum pump
Mounting Head Quantity	4
Mounting Speed	8000cph(optimalwithout vision detection); 5500cph (optimal with vision detection)
Control Accuracy	0.015mm
Component Type	0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.)
PCB Thickness	0.6mm~3.5mm
PCB Size	10mm(L)×10mm(W)～400mm(L)×290mm(W)
PCB Conveying	Manual operation
Nozzle Change	Manual operation
Control System	Built-in computer (embedded Linux operating system), 7-inch touch screen
Drive System	X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration
Transmission System	Synchronous belt + linear guide
Feeding System	60 Yamaha 8mm standard pneumatic feeder stacks (also suitable for Yamaha electric feeder, IC tray, and stick feeder), 11 preset general IC stacks, worksurface custom IC trays supported
Vision System	Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning

Vision System Ensure Accuracy

Auto correction offset

The double CCD vision cameras can auto calibrate the offset for all different kinds of components and ICs(auto correction of pick position and angle). Industry camera with high accuracy taking image of pins if IC, to ensure the patch accuracy.

60pcs Yamaha pneumatic feeder supported

simple & convenient operation

CHM-T560P4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot. It can also work with Yamaha vibration feeder.

Z Axis Detection

Z axis detection function can self-checking the height and angle during placement.
Make sure machine work perfectly with different kinds of components.

9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient.

Closed-loop Motion Control System

it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.

Industry Touch Screen

Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.

Mark point auto calibration

more accurate with vision system

After PCB has been put on machine, the machine will use the camera to automatically find the mark point, calibrate the PCB and avoid deviation.

Front IC Bulk Material Area

11pcs front bulk IC stack, suitable for some bulk ICs. more convenient.

IC Tray Supported

software allow 20 user-defined IC tray

User can add one or more IC tray in software, you just need to positioning the first component and the last component, then machine can auto continuous picking.

Dimensions	420mm×405mm×265mm
Net Weight	20kg
Rated Power	2500W (peak power)
Rated Voltage	AC220V 50Hz/60Hz
Drawer Size	300mm×300mm
Soldering Type	Lead Soldering / Lead-free Soldering
Maximum Soldering Temperature	300°C
Heating Mode	Infrared ray & hot air
Temperature Control Accuracy	±1°C (at constant temperature)
Soldering Cycle	5 ~ 10 minutes
Saved Reflow Curve Quantity	8

Dimensions	540mm×380mm×390mm
Net Weight	20kg
Work Table Size	300mm×400mm
Maximum Printable Size	300mm×400mm
Maximum Net Frame Size	370mm×470mm
Printing Speed	Manual Control
Thickness of Printable Substrate	0mm ~ 80mm
Work Table Horizontal Adjustable Volume	10mm
Printing Platform Height	190mm
Repeated Printing Accuracy	±0.01mm
Positioning Mode	Border positioning or benchmark hole positioning

Notes
1.Machines need keeping away from the humid environment and dust, or which will get on electrical shock and fire.
2.Machines need lying stable platform, or which the shake may lead to reduce the precision and even turn over and personal injury.
3.Don’t dismounting the machines casually, or the machine may be broken.
4.Don’t touch the optical axis and the mounting head, or which may damage the machine and hurt yourselves.
5.Make sure the machine engine accordance with the requirements of the standard machine and make sure lie on the ground very well.
6.Make sure the machine away from the inflammables and explosives to avoid the fire and getting the electric shock.
7.Take the small machine parts like suction nozzle at the place where the babies can’t touch.
8.Don’t take the pulling needle stretch out for too long time, or the pulling needle will be broken.
9.Don’t take the machine in the Sun or the highlight directly, or which will reduce the machine precision and even broke the machine.
10.Please kindly contact us if any other questions.

Hunan Charmhigh Electromechanical Equipment Co., Ltd

Phone: +86 731 85504084

Fax: +86 731 85504064

Karl Liang:

Mob: +86 18100733752 Wechat:+86 18100733752

Whatsapp:+86 18100733752 Skype:+86 18100733752

Add: 104-604,Building D, Jindao Industrial Park,No.179 Huizhi Middle Road,Hi-tech Development District, Changsha, Hunan, China

We are the source manufacturer of pick and place machines, integrating R&D, manufacturing and sales. We have provided one-stop SMT equipment experience to more than 8,000 users around the world, and provide optimal service solutions for various SMT production models. Let customers solve their problems at the lowest cost.

Hunan Charmhigh Electromechanical Equipment Co., Ltd. is the well-known manufacturer of high-end SMT equipment in China. The company is located in the Changsha High-tech Development Zone, covering a total area of 40000 square meters.

As a professional modern science and technology enterprise capable of both R&D, production and marketing, Hunan Charmhigh Electromechanical Equipment Co., Ltd. has become the benchmark of the SMT industry in China. With the development of more than ten years, Charmhigh has already turned into the leading brand of China high-end SMT machine.

From the exact beginning, Hunan Charmhigh Electromechanical Equipment Co., Ltd. has always adhered to the business philosophy of “Customer First, Innovation Paramount”. And various series of products with various functions have been designed and manufactured to meet the different production needs of different groups of customers and provide high-quality one-stop SMT solutions for customers in need.

The products of our company have been broadly applied in many fields, such as household electric appliance industry, automotive electronics, power-driven LED Lighting, installation of instruments, intelligent control, and consumer electronic & quantum communication.

Hunan Charmhigh Electromechanical Equipment Co., Ltd. has developed extensive marketing network including offline direct sales, online marketing, distributor sales as well as marketing by Foreign Trade Department of the company. By now, Charmhigh products have been serving thousands of customers all around the world.

Given the first-class product quality as well as the professional and enthusiastic services, Hunan Charmhigh Electromechanical Equipment Co., Ltd. has won countless high praise and unanimous affirmation from the customers both at home and abroad.

Besides we are actively recruiting overseas agents and distributors now.

Don't hesitate to contact us if you are interested in these valuable business opportunities!