44V 4.4Ah Electric Tying Machine Rechargeable Grape Vine Tying Tool For Vineyards

Electric Grape Tying Machine With 44V 4.4Ah Rechargeable Lithium Battery For Vineyards

battery tying machine: innovative and suitable for any type of tying

The binder with rechargeable battery is suitable for any type of binding and in particular for that of the vineyard. It allows to carry out effortlessly, with great productivity and accurate repeatability, a long-lasting work such as that of tying the vines. Thanks to its speed it can reach up to 60 tying per minute and therefore greatly reduce the time, allowing you to save over 50% of the time if compared to the manual tying of the vineyard.

The tying machine uses an innovative system thanks to the practical 90-meter reel of wire placed on the machine. The replacement of the reel is simple and guarantees great handling for the tying machine, avoiding the operator the movement of dragging the wire from the outside which can sometimes hinder the binding operations.

It is equipped with a binding system adjustable in 4 positions thanks to the special lever on the machine. The cordless tying machine is therefore a tying machine with an ergonomic handle, easy to use, high performance and low maintenance. Thanks to its lightness it can be used all day without any problem with a battery life that allows a working day.

With carrying case supplied.

The tying machine can also be integrated with the battery of the electronic pruning shears. In this way, with a single battery, it is possible to carry out both the pruning and tying operations at the same time.

Technical parameter:

Battery-powered tying machine
Binder weight: 0.95 Kg
Battery weight: 1.6 Kg
Maximum binding diameter: 25 mm
Reel length: 90 mt
Bindings per reel: about 640
Battery autonomy: 1 day
Rechargeable battery
With carrying case
Ergonomic handle
4 levels of adjustment
Low maintenance required

Switch action

Before turning on the power switch, always check that the charger is removed and that the binding arm of the tie machine is open.
►To start the tool, press the power switch and the power indicator is on.
►To stop use, press the power switch again, the switch will pop up and the power indicator is off.

1. Unscrew the inner hexagon screw with the attached hexagonal wrench；
2. Let the upper blade stick to the lower blade；
3. Re-tighten the inner hexagon screws.

►Make sure to use this thin washer when padded on some tool screws.
►When the upper blade is worn, follow the following method.
1. Remove the hexagon screw by using the attached hexagon wrench；
2. Remove the lock pin；
3. Remove the upper blade mounting seat；
4. Open the screw and replace the new blade；
5. After remounting the blade, install the blade.

OPERATION

1. Turn on the power switch and open the tool binding arm.

2. Place the things to be tied into the binding arm.

3. Press the handle and release to secure the front end of the rope to the lower blade.

4. Open the binding arm and remove the binding arm along with the rope.

5. Press the handle again to the end, and the blade cut off the rope and wrap the rope.After the handle is pressed to the bottom, it should be kept for about one second. Too short time may lead to unwinding and loose release; too long time may lead to the winding belt fracture and the binding failure.

6. Release the handle and tie complete.

SERVICE
1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
3. Follow instruction for lubricating and changing accessories.
4. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.

Applicaton

This tool is suitable for loose fixation of wires.Such as the branches of plants and stent fixation, multilinear beam fixation, etc.

Other picture

Weiwo is professional manufacture and supplier of electric pruner and electric tying machine and li-battery garden tools company. The company is in NingBo and recognized as the world's in consumer goods design, development, sourcing and distribution.

Best technical and quality let we can cooperation with most of worlds famous brand . Now Weiwo company have 2 product line one is professional and the other is DIY to fitting all of our customer requirement .The Company specializes in supply chain management of high-volume, time-sensitive goods of all of our customer .

We provide sophisticated, one-stop-shop supply chain solutions to meet customers' specific needs. From product design, raw material sourcing and production management to quality control, logistics, shipping and other important functions, its spectrum of services covers the entire supply chain end-to-end. Over the years, our company has won numerous industry accolades for its performance, governance and sustainability.

The Company is committed to the highest operational standards, conducting its business with integrity and good corporate governance practices with control best quality We believe that make best quality is based on the words "it's just the right thing to do".