Semiconductor Volume Resistivity Testing Equipment 23 ± 2 ℃ Ambient temperature

Semiconductor Volume Resistance Tester / Testing Machine

1. Description

ZY6156 Semiconductor Volumetric Resistance Tester is suitable for measuring the volume resistivity of rubber and plastic semi-conductive materials for wires and cables. It conforms to GB/T3048.3 "Volume resistivity of semi-conductive rubber and plastic materials" test method.

2. Standards

GB/T3048.3

3. Performance Parameters

DC power supply: voltage 0 ~ 5000V adjustable

Current meter: 0 ~ 20 mA

Current electrode: 20 mm x 70 mm

Voltage electrode: 1.0 mm

The range of resistance measurement is 0 ~ 108 ohm.

The pressure of potential electrode along the width of specimen: 65 N/M

Insulation plate size: 80 mm * 180 mm

Working power supply: AC 220V, 50HZ

4. Test Environmental Conditions

Ambient temperature: 23 ± 2 ℃

Relative humidity: (50 ± 5) %

5. Test Notes

Preparation of Specimen

(1) At least three specimens of the same size are prepared for each test. The specimens are rectangular, 110 mm in length, 50 mm in width and 2 mm or 4 mm in thickness. Thickness should be measured at approximately 6 points of equal distance along the length of the specimen, and the difference between the measured value and the average value of each point should not exceed (±5%).

(2) The surface of the test piece should be clean. When necessary, the test piece can be gently scrubbed with clay mixed with water, then rinsed with distilled water, and then dried in the air. When scrubbing, the surface of the test piece should not be damaged, and the test piece should not be cleaned with organic solvent which has corrosive or swelling effect.

(3) The vulcanized or plasticized specimens should be placed for at least 16 hours before they can be used for the test, but the longest time should not exceed 28 days. The test piece used as a contrast test has the same storage time as possible.

6. Pretreatment Before Test

(1) The two ends of the sample are clamped in two current electrode fixtures and placed on the insulating board. The sample is heated for 2 hours at (70±1)℃ in a thermostat.

(2) After heating, the samples, current electrodes and insulating plates were taken out and placed for 16 hours under the environment of (23±2)℃ and (50±5)% relative humidity.

ZONSKY’s three business units: wire & cable and plastic testing equipment division, flame retardant testing instrument division, environmental test equipment division, is a high-tech enterprise of research and development, manufacturing and sales. It has been established for nearly 20 years, gathering the industry's top talents, elite teams, excellent technology, high-quality customer groups and innovative ideas, which enables us to become the leader of the experiment instrument industry.

1. Wire and cable and plastic testing instruments

It is applied to equiped wire & cable, special cable, automobile and rail transit cable, aviation wire and cable, charging hub wire and cable, robot cable, UL, VDE, CSA certified testing instruments and plastics, electrical appliances testing instruments, and fire research cooperation in the distinguished universities.

2. Flame retardant testing equipment

Applied to construction and components,wire and cable,fire fighting and engineering, plastics & chemicals, furniture & wood, textile & fiber, motor vehicles, electronics and electrical appliances, aviation materials, vessel materials, children's toys and flame retardant testing materials based on the standards from western countries.

3. Environmental testing instruments

It is applicable to rigorous testing of environmental requirements in all walks of life, such as electronics connectors, hardware and so on, which are severely tested under high and low temperature. We provide customers with an overall solution of laboratory planning, selection, construction, technical consultation and training.

ZONSKY has precipitated nearly twenty years of professional skills in order to create quality products with expertise. The idea of "sailing dreams with science and technology" has gathered the elite of the industry and created excellent product team.

ZONSKY has been consistently committed to the belief of improving the competitiveness of enterprises and enhancing the corporate image, creating high quality products, keeping innovation and never stop...